产品中心
所在位置:主页 > 产品中心 >

150s vacuum extruder

更新时间:2020-03-09 点击数:

I. product features
This machine has large extrusion pressure, high vacuum degree, compact extruded mud strip and neat appearance. It is fully suitable for the requirements of one-time code firing process, with high productivity and low molding water content, reducing energy consumption and loss in production. It is an ideal equipment to produce coal gangue, high content fly ash, shale and inferior sand brick. 1. The vacuum extruder is composed of two-stage mixing extrusion part (upper level) and extrusion molding part (lower level), and equipped with air compression system and vacuum pumping system. The pneumatic clutch can be controlled remotely. The upper and lower levels can be installed in one or T-shape. 2. The main body of the vacuum extruder is welded with high-quality steel plate, which has the characteristics of reasonable structure, large extrusion pressure, high vacuum degree, durability, strong applicability, low energy consumption, high efficiency, convenient maintenance, etc. 3. The cutter of the main machine of the vacuum brick machine is made of wear-resistant material, which makes its service life 4-7 times longer than that of the ordinary cutter; the lead (pitch) is arranged scientifically, which has the function of "micro pressure transmission, high pressure extrusion", which can increase the extrusion pressure and improve the working efficiency; and the floating shaft structure can eliminate or reduce the shaking and shaking of the equipment caused by the bending of the main shaft due to long-term use; the main shaft can be used to prevent the machine from shaking and shaking Energy saving of equipment is 15-30%. 4. The shaft, gear and other important parts of the vacuum extruder are made of high-quality carbon steel and alloy steel by heat treatment process such as quenching and tempering, which prolongs the service life of the equipment. 5. Safety devices are installed in the drive and material level control of the vacuum extruder's paddle plate, so that the main parts of the equipment are not easily damaged in the use process, and the efficiency of equipment fault maintenance is improved. 6. A pressure gauge is installed in the middle of the vacuum extruder head, which can monitor the quality and quantity of products according to the pressure displayed by the pressure gauge. After two-stage extrusion and humidification, the degree of maturation and extrusion pressure of raw materials are greatly increased. Achieve high quality and high yield.



2. Technical parameters:
    Parameter    Unit of measurement     JKY150S-4.0
   Throughput   Block / hour     35000-55000
 Allowable extrusion pressure   MPa     4.0
   Molding moisture content     %     13~18
 vacuum degree      MPa     ≤-0.092
 Power     Kilowatt     355+160
  Outline size    millimeter  11000×3300×3700
 Weight   Kilogram     48000
 

上一篇:没有了

下一篇:没有了